PREVENT 100% OF PROBE DAMAGE
Stop paying thousands of dollars in probe damage costs every year. The intelligent safe distance system analyzes your CAD model, automatically finds the highest point, and creates a 50mm protection zone. Save for a lifetime.
SELECT YOUR MACHINE, START NOW
CNC brands and models in our ready-to-use library. FANUC, Siemens, Syntec, Mitsubishi... Select your machine from the list, mount your probe, start measuring. Zero programming, zero setup complexity.
CALIBRATION WITHOUT MACROS
Perform full calibration without relying on machine macros. Step-by-step visual guide leads you through the process, system automatically generates G-Code. Mount the dial indicator, rotate the probe, press START - done. The era of complex macro programming is over.
CUSTOM PROBE DESIGN
No need for complex CAD software. Enter your dimensions in the parametric interface, instantly see it in 3D preview, save as a solid model. Probe diameter, holder dimensions, clearance distances - everything under your control. Professional design in minutes.
PRECISION & AUTOMATION
Optimal probe approach angle is automatically determined for every surface. The system analyzes CAD geometry, calculates surface normals, and finds the most accurate measurement direction. No manual angle calculations, trial and error, or risk of incorrect positioning. Precise, clear, and repeatable measurements - every time.
8 MEASUREMENT MODES, ONE INTERFACE
Point probing, circle measurement, slot width, angle inspection, flatness - every measurement type you need is ready. Click the icon, mark points on CAD, start measuring. No complex menus, no lengthy procedures. User-friendly interface, professional results, in minutes.
REAL-TIME TOOLPATH ANIMATION AND COORDINATE TRACKING
Watch the generated toolpath in a photo-realistic 3D environment. Real-time X-Y-Z coordinates, feed rate, and retract distance are displayed on screen for every probe movement. Scrub the animation forward and backward, pause at specific points, compare alternative paths. Complete transparency, complete control.
UNIVERSAL COMPATIBILITY & SPEED
Complex G-Code writing is now a thing of the past. Define your measurement operation, the system automatically generates code tailored to your machine. Checksum verification, header information, safety commands - everything included. Get the code, transfer to machine, run. No programming knowledge required, in production within minutes.
AUTOMATIC TOLERANCE CONTROL AND DEVIATION ANALYSIS
As soon as measurement completes, the system compares every point with the CAD model. Define your tolerance values, and the software automatically marks which measurements are OK and which are ERROR. Independent deviation analysis on X, Y, Z axes. Slot width, angle, diameter - all parameters under control. The era of manual calculation is over.